Book Concepts

Book Concepts

(Link in case web player does not work)

Click this Link






Comments

Post a Comment

Popular posts from this blog

Car Week 3 Progress

Image
  The 3rd week has concluded for the car project, and I and happy with the progress I have made. There has been some rather significant changes in the model, including the workflow regarding it, and the reference itself.  I have been given permission to change the Countach from the LP400 model, to that of the LP500. The primary changes between these two models, is the removal of the roof engine mounted intakes. Where the side meets the undercarriage is less pronounce, as well as the the actual frame of the vehicle being more square like. Basically, its a more bare boney version, relative to the LP400 After removing the air intakes, I spent time fixing the geometry around that area so it worked smoother with the rest of the body. These changes might all sound minor, but they have major impacts on the overall design of the vehicle, and the future details I will be adding to it. Here you can see both the old and newer models side by side: I also resolved around 90% pf tje triangl...
Read more

Car Week 1 Progress

Image
     This week went pretty well, and I'm happy to say that I have not run into any major issues so far on the car project. The care I will be modeling is the Lamborghini Countach, specifically the LP400 which was made between 1971-1974. The first think I did was get blueprints so I could accurately model the car. This by no means is a rare or uncommon vehicle, so finding material on it was not difficult. I located abundance of reference, that will help me accurately model the vehicle. I did find rather peculiar is that the color variety the car comes in is in the single digits. Normally with high end sports cars you get quite a spectrum, so this was interesting to see.  Next I made a cub (more visible in the picture above) and imported the exact measurements of the vehicle. Once I had the right dimensions, I created 4 addition orthographic cameras. One for the roof, side, back, and front. I switched my modeling measurements settings from meters to inches, so I could ...
Read more

Car Week 2 Progress

Image
 The majority of this week I spent improving the general mesh of the car. Specifically getting the mesh to be less blocky. I did not add to many edge loops to the build, as I wanted to keep it lower to more easily manipulate the car, but more importantly be able to easily cut out sections like the hood and bumpers later on. I also added a backplate behind the wheels. The underside of the car wont be modeled, but this portion of the bottom can be seen from the sides. This will be made a bit nicer in the future, but it was primarily needed now as to clearly indicate that there is portions of the model their, that aren't part of the cars main body. I added some minor extrusions and edge loops to the part of the body that meets the tire frame. This was so that the frame remains intact after smoothing and subdividing the car. This was also done where the side of the cockpit meets the lower body, as well as where the window frames meet the roof. Speaking of windows, they have been remove...
Read more